Electrical fluid selection
Specifying silicone transformer insulation fluid
Review TIF-315 silicone fluid for transformer cooling and electrical insulation. Compare dielectric, viscosity and thermal data with equipment requirements.

At a glance
TIF-315 serves transformer cooling and electrical insulation applications within ECO USA’s technical-grade silicone range. It is 100% linear PDMS without additives, with a typical kinematic viscosity of 50 mm²/s at 25°C. Compare its dielectric and thermal data with the equipment manufacturer’s fluid requirements and complete test conditions.
Start with the equipment specification
Define the electrical-insulation and cooling performance required by the transformer or other electrical equipment. Record the manufacturer, model and fluid specification, and distinguish a new-fill application from a proposed replacement. Review dielectric, thermal, moisture and compatibility requirements together.
Share the operating conditions and the performance requirements your engineering team must satisfy. A product described as a transformer fluid is not automatically approved for every transformer, seal system or operating condition.
Read typical values with their test conditions
TIF-315 has a typical kinematic viscosity of 50 mm²/s at 25°C; mm²/s and cSt express the same unit. Preserve the temperature when comparing it with another product.
For dielectric performance, review the complete test information rather than comparing headline values alone. Include the test method and conditions in your qualification worksheet. Compare the typical product properties with your equipment’s acceptance specification using equivalent test conditions.
| Requirement | What to document |
|---|---|
| Viscosity | Value, units, temperature and required range |
| Dielectric properties | Required result, test method and test conditions |
| Moisture and physical properties | Specified limits and applicable measurement methods |
| Equipment compatibility | Manufacturer requirements, material compatibility and approval responsibility |
Build the documentation package
- Current TIF-315 technical data sheet for product properties and test conditions.
- Current safety data sheet for handling and hazard information.
- Your equipment manufacturer’s fluid requirements and any applicable project specification.
- A sample-evaluation plan with measurable acceptance criteria.
- Any required lot-specific documentation, with availability confirmed before ordering.
Discuss your purchasing specification, test methods and required acceptance limits with ECO USA before placing an order. Include required documentation with the inquiry so the supply discussion uses the same requirements as the technical review.
What should happen before the product is specified?
Have the responsible engineering team approve the evaluation method and review the results. Confirm compatibility and equipment requirements through the appropriate manufacturer or qualified specialist. This guide does not provide procedures for energized work, fluid replacement or transformer servicing.
Is a viscosity match sufficient? No. It addresses only one property. The complete fluid and equipment requirements still need evaluation.
What helps ECO USA respond to a sample request? Include the equipment type, intended fill or qualification context, required properties, test plan, estimated quantity and delivery location. Identify any requirements that differ from the TIF-315 product properties.
