Technical documentation
SDS vs TDS: documents for silicone product qualification
Use SDS and TDS documents to evaluate technical-grade silicone products. Review application performance, test conditions, handling and purchasing requirements.

At a glance
For technical-grade silicone product selection, use the TDS to review technical product properties and applications, and the SDS for safety and handling information. Match the product, test conditions and acceptance criteria to your process. Request current ECO USA documents for the exact fluid or emulsion you want to evaluate.
What information belongs in a safety data sheet?
OSHA’s hazard communication framework uses a standardized, 16-section safety data sheet format. It organizes information including product identification, hazards, first aid, handling and storage, exposure controls and physical and chemical properties.
First, use the SDS for your workplace’s safety review and handling procedures. Next, check that the product identity and revision match the material being evaluated. Ask for clarification if the document supplied does not match the product name or grade on your order.
What does a technical data sheet tell you?
Use a TDS to connect product properties with the required application result: silicone-fluid flow, emulsion gloss and release, textile processing, brake-fluid characteristics or electrical insulation. Compare units, reference temperatures, test conditions and the distinction between specifications and typical values.
For example, DMS-300 selection includes its viscosity grade at 25°C. In contrast, the 350 and 1,000 cSt values for EMS-4000 and EMS-5100 describe the base silicone fluid, not the supplied emulsion. Similarly, the listed TIF-315 properties are typical values. Reading the label beside a number is as important as reading the number.
Which documents are available from ECO USA?
Use the Resources library to request current SDS and TDS documents for DMS-300, EMS-4000, EMS-5100, SBF-400 and TIF-315. Product documentation is provided by our team on request. Ask our team for the current product documents when beginning a new qualification.
If your purchasing process requires a certificate of analysis, a specific test report or other lot-related documentation, state that requirement in the inquiry and confirm availability. A general TDS is not a lot-specific test record.
A practical qualification checklist
- Identify the material. Record the exact product, grade, supplier and intended application.
- Collect current documents. Keep the SDS and TDS with their revision information.
- Define acceptance. Translate the application requirements into measurable limits and test conditions.
- Evaluate a sample. Record the lot, test method, conditions and results in the actual application.
- Resolve differences. Discuss any gap between our product properties and your required specification before ordering.
- Confirm the supply requirements. Include quantity, delivery needs, packaging requirements and required documentation in the commercial discussion.
Questions to ask before ordering
Does a matching TDS mean the product is qualified? It supports screening, but qualification depends on your defined requirements and evaluation results.
Can the SDS replace a TDS? No. Safety and technical documents serve different purposes. Use the SDS for handling review and the TDS for product-property evaluation.
What should I send with a documentation request? Include the exact product code, grade if applicable, intended application and the documents or test details your approval process requires. This helps our team respond with relevant information.


